SAE 100R16 | Hydraulic Hose

The Kingdaflex SAE 100R16 hydraulic hose is engineered to replace standard SAE 100R2 hoses in applications where space is at a premium. It features a high-tensile steel wire reinforcement that handles high working pressures (up to 5,800 PSI) while offering superior flexibility. The key advantage of our R16 hose is its bend radius, which is approximately 50% tighter than standard SAE 100R2AT hoses, allowing for easier routing and reduced hose length requirements.

Comparison: SAE 100R16 vs. SAE 100R2AT

Many customers ask if they should switch to R16. Here is why you might:

• Bend Radius: SAE 100R16 has a bend radius that is half (1/2) that of SAE 100R2AT. This means it can turn sharper corners without kinking.
• Dimensions: R16 is more compact with a slightly smaller outer diameter (OD), making it easier to install in hose bundles.
• Pressure Rating: R16 maintains the same high working pressure ratings as R2AT.
• Conclusion: If you need to save space or have complex routing, R16 is the superior choice. If space is not an issue, R2AT is a cost-effective standard option.

Key Benefits of SAE 100R16

• Compact Design: 90mm bend radius (for 1/2″ size) allows for easier routing in tight engine compartments and fork lifts.
• High Pressure: Working pressure up to 5,800 PSI (400 Bar) for heavy-duty hydraulic lines.
• Durable Cover: MSHA-compliant anti-abrasion cover available upon request for mining environments.

Applications of SAE 100R16 Hose

• Tight Routing: Perfect for machinery where hoses must make sharp turns.
• Compact Equipment: Mini skid steers, forklifts, and compact track loaders.
• Pilot Lines: High-pressure pilot control lines.
• General Hydraulics: Compatible with petroleum-based hydraulic fluids, water-glycol, and lubricating oils.

FAQs

Q: Is SAE 100R16 a 1-wire or 2-wire hose?

A: It depends on the size. Typically, smaller sizes (up to 1/2″) may use one or two braids, while larger sizes use two wire braids to maintain the high pressure rating. Regardless of construction, it always meets the R16 pressure and flexibility standards.

Q: Can I use standard crimp fittings on SAE 100R16?

A: Yes, SAE 100R16 hoses generally use the same standard fittings as SAE 100R2AT / 2SN hoses (Non-Skive). However, always verify the crimp diameter with our crimping chart before assembly.

Q: What is the main advantage of R16 over R17?

A: Both are compact hoses. However, SAE 100R16 is designed to match the specific pressure ratings of R2AT (varying by size), whereas SAE 100R17 maintains a constant 3000 PSI working pressure across all sizes.