Premium 5/8 Inch Hydraulic Hose Manufacturer | High-Pressure & Durable

Manufacturer of SAE/DIN standard 5/8 inch hydraulic hoses. Engineered for high-pressure systems up to 350 Bar, our hoses feature abrasion-resistant covers and support a temperature range of -40°C to +120°C. Ideal for excavators, mining machinery, and industrial fluid transfer.
  • Standards Compliant: SAE 100 R1/R2/R12/R13/R15 & DIN EN 853/856.
  • Reinforcement: 1-Wire, 2-Wire Braided, or 4-Spiral Steel.
  • Pressure Range: Up to 280 bar.
  • Safety Factor: 4:1.
Get a Quote
Kingdaflex 5 8 inch Hydraulic Hose

5/8 Hydraulic HoseTechnical Specifications & Customization Options

We allow you to choose hose materials based on chemical compatibility, temperature resistance, and abrasion protection. By selecting the right material, we ensure your 5/8 hydraulic hose delivers safe, long-lasting performance in demanding hydraulic applications.

Inside Outsid Working Pressure Burst Pressure Min Bend Radius Weight
Min(mm) Max(mm) Max(mm) Bar Psi Bar Psi mm kg/m
SAE 100R1AT/EN853 1SN 15.5 16.7 24.5 130 1885 520 7540 200 0.52
SAE 100R2AT/EN853 2SN 15.5 16.7 26.2 250 3625 1000 14500 200 0.80
SAE 100R1A/EN853 1ST 15.5 16.7 27.0 130 1885 520 7540 200 0.52
SAE 100R2A/EN853 2ST 15.5 16.7 28.6 250 3625 1000 14500 200 0.94
EN857 1SC 15.5 16.7 23.0 130 1885 520 7540 150 0.42
EN857 2SC 15.5 16.7 24.7 250 3625 1000 14500 170 0.68
DIN 1SNK 15.5 16.7 22.8 150 2175 600 8700 150 0.45
DIN 2SNK 15.5 16.7 24.4 290 4205 1160 16820 150 0.65
SAE 100R16 15.5 16.7 25.4 250 3625 1000 14500 100 0.65
SAE 100R17 15.5 16.7 25.9 210 3045 840 12180 100 0.64
SAE 100R5 15.9 17.0 28.0 105 1520 420 6080 165 0.68
SAE 100R3 15.6 16.7 27.8 61 885 245 3550 140 0.53
SAE 100R6 15.3 16.5 23.8 24 348 96 1392 125 0.33
EN854 1TE 15.3 16.5 23.9 24 348 96 1392 125 0.27
EN854 2TE 15.3 16.5 24.9 50 725 200 2900 90 0.35
EN854 3TE 15.3 16.5 26.9 80 1160 320 4640 105 0.47
SAE 100R7 16.0 23.0 105 1500 420 6000 130 0.29
SAE 100R8 16.0 23.1 200 2900 800 11600 130 0.29
EN856 4SP 15.5 16.7 29.0 350 5070 1400 20300 250 0.98
SAE 100R9 15.5 16.7 28.2 280 4060 1120 16240 200 0.98
SAE 100R12 15.5 16.7 28.2 280 4060 1120 16240 200 0.98
drop

Tube & Cover Materials

  • Inner Tube: Oil-resistant Synthetic Rubber (Nitrile/NBR).
  • Cover: Weather & Abrasion Resistant Synthetic Rubber (Neoprene/CR).
  • Special Option: MSHA approved cover (Fire resistant) or UHMPE (Super abrasion resistant).
Pressure Range Customization

Pressure Range Customization

Tailored to your system needs: From Standard Duty (SAE 100R1/R2) at approx 1,885-3,625 PSI, up to High Pressure (SAE 100R12/EN856 4SP) at 20,300 PSI for 5/8″ Hydraulic Hose.

Measuring tape

Cut Length & Assembly

  • Available in continuous coils (e.g., 20m/40m or 50m/100m) or custom cut lengths specific to your OEM drawings.
  • Precision crimping services available.
Wire Reinforcement

Reinforcement Structure

  • Braided: 1-Wire (R1), 2-Wire (R2/2SN) – For flexibility.
  • Spiral: 4-Wire (4SP/4SH) – For extreme pressure and impulse resistance.

Types of 5/8 Inch Hydraulic Hoses We Manufacture

5:8 hydraulic hose

Standard 2-Wire Braided 5/8 Hydraulic Hose

(SAE 100 R2AT / DIN EN853 2SN)

The industry standard for medium-to-high pressure applications. Our 5/8″ R2AT hose features two layers of high-tensile steel wire braid, offering the perfect balance between flexibility and durability. It is the go-to solution for general hydraulic systems.

  • Standard: SAE 100 R2AT / DIN EN 853 2SN

  • Working Pressure: 250 Bar (3625 PSI)

  • Applications: Agricultural tractors, dump trucks, and mobile construction equipment.

Get Quote for R2 Hose
en856 hydraulic hose

High-Pressure Spiral 5/8" Hydraulic Hose

(DIN EN856 4SP / 4SH)

Engineered for extreme conditions. This 5/8 inch hydraulic hose is reinforced with four layers of spiraled steel wire, allowing it to withstand severe pressure spikes and high-impulse loads. Designed for the toughest mining and excavation environments where failure is not an option.

  • Standard: DIN EN 856 4SP / 4SH
  • Working Pressure: Up to 350 Bar (5075 PSI)
  • Durability: Tested to 1,000,000 impulse cycles.
  • Applications: Excavators, mining drills, and hydrostatic drives.
Get Quote for 4SP Hose
5 8 high pressure hydraulic hose

Compact 5/8 Inch High-Pressure Hose

Designed for tight routing. Our R16/R17 5/8″ hoses handle high pressures (similar to R2) but with half the bend radius. This compact design makes installation easier in cramped engine compartments and complex machinery layouts.

  • Standard: SAE 100 R16 / R17
  • Advantage: 50% tighter bend radius than standard R2 hose.
  • Applications: Forklifts, machine tools, and tight installation spaces.
Get Quote for R16/R17 Hose
abrasion resistant 5:8 hydraulic hose

Thermoplastic & Non-Conductive Hose

Lightweight and versatile. Our 5/8″ thermoplastic hoses feature a synthetic fiber reinforcement, making them significantly lighter than rubber hoses. Non-conductive options are available for applications requiring electrical isolation.

  • Standard: SAE 100 R7 / R8
  • Feature: High chemical resistance & Electrical non-conductivity.
  • Applications: Aerial lifts (cherry pickers), lubrication lines, and utility vehicles.
Get Quote for Thermoplastic Hose

FAQs of 5/8" Hydraulic Hose

What is the MOQ (Minimum Order Quantity) for 5/8 inch hydraulic hose?

For bulk manufacturing orders, our standard MOQ is 500 meters per specification. However, for popular items like SAE 100 R1/R2 5/8″, we often maintain stock, allowing for smaller trial orders or immediate shipment. Please contact our sales team to check the current inventory status.

Yes, we specialize in OEM manufacturing. We can print your brand name, logo, part numbers, and specifications directly on the hose layline. We also offer customized packaging solutions to match your brand identity, ideal for distributors and equipment manufacturers.

Quality is our priority. Every batch undergoes rigorous testing, including burst pressure tests, impulse testing (up to 400,000 cycles for spiral hoses), and dimension checks. We provide full Mill Test Certificates (MTC) and inspection reports with every shipment, ensuring compliance with SAE, DIN, and ISO standards.

For a standard container load (mixed sizes/types), our production lead time is typically 10 to 15 days. We understand the importance of timely delivery and can also arrange expedited air freight for urgent sample or repair orders.

Absolutely. We recommend using our matched Dash-10 (5/8″) hydraulic fittings (Ferrules, BSP, JIC, ORFS, NPT) to ensure a secure, leak-free assembly. We can supply loose fittings or provide custom pre-crimped hose assemblies ready for installation.